Applicaiton
Contact Us
ADD: 9th Floor, Building B1, Fengming Shenggu Industrial Park, No. 88 Yongqi Road, Dongfeng Town, Zhongshan City
Tel: 4006-928-828
sanshe@zs-sanshe.com
Tel: 86-13825586480
Styrene-acrylic emulsion or pure acrylic emulsion paint;
White latex;
Hydraulic binders or other binder systems;
Other polymer systems that cannot use silicones.
(1) The X-10C defoamer can be diluted with thickened water. During dilution, the stirring speed should be between 30 rpm and 60 rpm, and the recommended stirring time should not exceed 10 minutes. For specific dilution instructions, please contact our customer service department. We shall not be liable for any adverse consequences arising from improper use of this product.
(2) When using this product on-site, it is recommended to add the defoamer in a location where it can easily disperse.
The recommended addition amount is 0.1–1.2% of the coating's mass.
When storing for an extended period, stir well before use; this will not affect the efficiency of use.
(1) SS-605 is a mixture and belongs to a thermodynamically unstable system. After prolonged storage, it may exhibit layering or slight precipitation, which is a normal phenomenon. Users are advised to give it a brief stir before use to ensure that this does not affect the performance (stirring speed: 30–60 rpm).
(2) This product must not be diluted with water. Diluting it with water may cause layering, reducing its defoaming effect and ultimately increasing usage costs. Our company assumes no responsibility whatsoever for any consequences arising from such dilution.
(3) When using this product on-site, it is recommended to add the defoamer in a location where it can easily disperse.
Suitable for architectural coatings and water-based industrial paints, waterproof coatings, enhancement of functional emulsion composite performance, and high-end inorganic coatings.
(1) Suitable for inorganic formaldehyde-removing interior wall coatings, pure and eco-friendly children’s paints, interior wall artistic coatings, various organic coating topcoats, formaldehyde-removing artistic coatings, and more.
(2) Product Usage Instructions: Add the nano-inorganic silicon along with other fillers during the paint grinding stage. Disperse at high speed for more than 10 minutes to effectively reduce the amount of dispersant used.
(3) Product addition ratio: For inorganic interior and exterior wall coatings, the addition amount is 1% to 30%. This formulation offers excellent thixotropy, prevents sedimentation and sagging, enhances strength, increases wear resistance, improves weather resistance, and provides water resistance.
(1) The product can be used in water-based inorganic coatings, architectural coatings, elastic textured finishes, artistic coatings, and more.
(2) Product Usage Instructions: During the paint grinding stage, add nano-inorganic silicon SZ-WJ253 together with other fillers. Disperse at high speed for more than 10 minutes to effectively reduce the amount of dispersant used.
(3) Product addition ratio: For inorganic interior and exterior wall coatings, the addition amount is 1% to 30%. This formulation offers excellent thixotropy, anti-settling properties, anti-sagging performance, enhanced strength, improved abrasion resistance, superior weather resistance, and water resistance.
(4) When added at a dosage of 10-20% in water-based formulations, it can effectively provide thixotropy to prevent sedimentation and sagging, enhance permeability, and improve water resistance.
Zhongshan Sanshe New Materials Co., Ltd.
9th Floor, Building B1, Fengming Shenggu Industrial Park, No. 88 Yongqi Road, Dongfeng Town, Zhongshan City