Applicaiton
Contact Us
ADD: 9th Floor, Building B1, Fengming Shenggu Industrial Park, No. 88 Yongqi Road, Dongfeng Town, Zhongshan City
Tel: 4006-928-828
sanshe@zs-sanshe.com
Tel: 86-13825586480
Water-based additive
Simply add this product directly to the adhesive at a concentration of 0.1% to 0.2%, and mix thoroughly until evenly distributed. The content of free formaldehyde can meet the national limit standards, and the product performs best when used at temperatures below 40℃!
Simply add this product directly to the coating at a concentration of 0.1% to 0.2%, and mix thoroughly until uniform. The content of free formaldehyde can meet the national limit standards, and it performs best when used at temperatures below 40℃!
Styrene-acrylic emulsion or pure acrylic emulsion paint;
White latex;
Hydraulic binders or other binder systems;
Other polymer systems that cannot use silicones.
(1) The X-10C defoamer can be diluted with thickened water. During dilution, the stirring speed should be between 30 rpm and 60 rpm, and the recommended stirring time should not exceed 10 minutes. For specific dilution instructions, please contact our customer service department. We shall not be liable for any adverse consequences arising from improper use of this product.
(2) When using this product on-site, it is recommended to add the defoamer in a location where it can easily disperse.
The recommended addition amount is 0.1–1.2% of the coating's mass.
When storing for an extended period, stir well before use; this will not affect the efficiency of use.
(1) SS-605 is a mixture and belongs to a thermodynamically unstable system. After prolonged storage, it may exhibit layering or slight precipitation, which is a normal phenomenon. Users are advised to give it a brief stir before use to ensure that this does not affect the performance (stirring speed: 30–60 rpm).
(2) This product must not be diluted with water. Diluting it with water may cause layering, reducing its defoaming effect and ultimately increasing usage costs. Our company assumes no responsibility whatsoever for any consequences arising from such dilution.
(3) When using this product on-site, it is recommended to add the defoamer in a location where it can easily disperse.
Zhongshan Sanshe New Materials Co., Ltd.
9th Floor, Building B1, Fengming Shenggu Industrial Park, No. 88 Yongqi Road, Dongfeng Town, Zhongshan City