Applicaiton
Contact Us
ADD: 9th Floor, Building B1, Fengming Shenggu Industrial Park, No. 88 Yongqi Road, Dongfeng Town, Zhongshan City
Tel: 4006-928-828
sanshe@zs-sanshe.com
Tel: 86-13825586480
Suitable for architectural coatings and water-based industrial paints, waterproof coatings, enhancement of functional emulsion composite performance, and high-end inorganic coatings.
(1) Suitable for inorganic formaldehyde-removing interior wall coatings, pure and eco-friendly children’s paints, interior wall artistic coatings, various organic coating topcoats, formaldehyde-removing artistic coatings, and more.
(2) Product Usage Instructions: Add the nano-inorganic silicon along with other fillers during the paint grinding stage. Disperse at high speed for more than 10 minutes to effectively reduce the amount of dispersant used.
(3) Product addition ratio: For inorganic interior and exterior wall coatings, the addition amount is 1% to 30%. This formulation offers excellent thixotropy, prevents sedimentation and sagging, enhances strength, increases wear resistance, improves weather resistance, and provides water resistance.
(1) The product can be used in water-based inorganic coatings, architectural coatings, elastic textured finishes, artistic coatings, and more.
(2) Product Usage Instructions: During the paint grinding stage, add nano-inorganic silicon SZ-WJ253 together with other fillers. Disperse at high speed for more than 10 minutes to effectively reduce the amount of dispersant used.
(3) Product addition ratio: For inorganic interior and exterior wall coatings, the addition amount is 1% to 30%. This formulation offers excellent thixotropy, anti-settling properties, anti-sagging performance, enhanced strength, improved abrasion resistance, superior weather resistance, and water resistance.
(4) When added at a dosage of 10-20% in water-based formulations, it can effectively provide thixotropy to prevent sedimentation and sagging, enhance permeability, and improve water resistance.
(1) The product can be used in inorganic cement, cement mortar, waterproofing, and other applications.
(2) Product Usage Instructions: Add the SB resin together with other additives and stir for more than 10 minutes until thoroughly dispersed.
(3) Product addition ratio: Microcement is added at a rate of 30%-50%, which increases strength, enhances abrasion resistance, improves weather resistance, and boosts water resistance.
Cement mortar addition: 20-40%. Excellent miscibility, enhancing product density and early strength.
Water-based inorganic coatings: various penetrating primers, inorganic-cured flooring, and weather-resistant topcoats.
Inorganic polished flooring, cement product enhancers, and applications requiring early strength, etc.
SZ-WJ258 is suitable for applying a microcement topcoat to concrete substrates and is ideal for producing single-component water-based floor coatings, intended for both indoor and outdoor cement/concrete floors. It can also be used as a topcoat on ABS plastic substrates and is well-suited for formulating water-based silver powder paints and other water-based plastic coatings.
WJ-2022 exhibits high hardness after curing and forms a monolithic bond with inorganic substrates, thus minimizing the impact of substrate conditions on the coating and ensuring a long service life. The silicate coating system using WJ-2022 demonstrates excellent storage stability and does not exhibit post-thickening or gelation phenomena.
The recommended addition level is 0.1% to 2% based on the total formulation.
The recommended addition amount is 0.1% to 2% based on the total formulation; the optimal dosage depends on the specific formaldehyde content of the system.
Zhongshan Sanshe New Materials Co., Ltd.
9th Floor, Building B1, Fengming Shenggu Industrial Park, No. 88 Yongqi Road, Dongfeng Town, Zhongshan City